Induction Welded Roof Systems
Induction welding for TPO and PVC roof systems
Electromagnetic induction welding is relatively new attachment method for TPO and PVC single ply roof systems. This attachment method is commonly referred to as Rhinobond or InvisiWeld. The process relies on special TPO or PVC plates that are found directly beneath the roof insulation. The plates serve two purposes. First, they are used to attach the roof insulation or cover board to the structural roof deck. Secondly, since they are coated with the same material as the roof membrane, they are welded to secure the membrane. It is important to note that the plates are roof system specific. For example, TPO plates can only be used with a TPO membrane and PVC plates can only be used on a PVC roof system.
How does the Induction Welding Process work?
TPO and PVC roof systems are called Thermoplastic as the seams of the membrane and flashings can be fused together through a process called hot air welding. Special hot air welders are first used to secure the seams of a TPO or PVC roof system. Next it is time to secure the roof membrane to the plates. The underside of the roof membrane is then welded to the plates with an induction tool. Most induction welding equipment has a plate finding tool so that the plates can be located beneath the membrane. After the welding is complete, magnetic cooling clamps are placed over the plates to ensure bottom surface of membrane is bonded to the coated plates and so the heat from the plate does not burn the roof membrane.
What are the benefits of an Induction Welded Roof?
This system requires fewer fasteners and allows for increased productivity, less labor cost, lower material cost and high wind uplift ratings. This system is available from most major commercial roof manufacturers including; Firestone Building Products (InvisiWeld), Carlisle Syntec Systems (RhinoBond), GAF Materials Corporation (RhinoBond), Johns Manville (Isoweld) and Duro-Last (RhinoBond). Roof system warranties for induction welding are available for up to 20 years. They can be installed on many types of roof decks including steel, wood, and concrete.
- Roof systems are installed more efficiently through induction welding without sacrificing wind uplift resistance from similar systems.
- Induction welding can occur in cold weather when adhered systems cannot.
- Membrane seams are not penetrated with fasteners.
- No half sheets are required, reducing the amount of seams on the roof.
- The installation of induction welded membrane roofs do not produce fumes, odors or VOC’s.
- Induction weld systems are an economical solution for metal retrofit applications.
For more info about installing PVC or TPO induction welded roof system, please call us at 513-891-9151 in Cincinnati or 513-344-9151 in Florence, KY or contact us via email.